TL-WA501G + 1.0 RESET method: first turn off the power, then press the RESET key do not put, and then turn on the power after 3 seconds, the SYSTEM light first turn off and then on, the AP will be restored to the factory default value. Default management address: 192.168.1.254 default user password: admin/admin TL-WA501G + 2.0 RESET method: Power-on state, press the RESET key for more than 5 seconds, the router will restore to the factory default value.
Default management address: 192.168.1.1 default user password: admin/admin TL-WR841N V2: When powered on, the router restores to the factory default value after pressing the RESET key three times in five seconds. TL-WR841N V1: first turn off the power, then hold down the RESET key do not put, turn on the power, wait for the system light to flash three times and then release the RESET key, the router will restore to the factory default value. TL-WR7xxN/TL-WR841N V3 V5/941N V2 V4: powered on, press the RESET key for more than 5 seconds, the router will be restored to the factory default value. TL-WR7xxN/TL-WR841N/TL-WR941N reset method Default management address: 192.168.1.1 default username and password: admin/admin īytes. Default management address: 192.168.1.1 default user password: admin/admin Ĭonventional RESET method: first turn off the power supply, then hold down the RESET key, and then turn on the power, wait until the system light flashes three times and then release the RESET key, the router will be restored to the factory default value. TL-WR340G +/TL-WR541G + (1.6)/TL-WR641G + (1.6): When powered on, hold down the RESET key for more than 5 seconds, and the router restores to the default factory value. Default user name and password: admin/admin. TL-R400 Reset method: press the Reset key about 2 seconds after the release, the router will restore to the factory default value. Default management address: 192.168.123.254 default user name and password: admin/admin TL-R400 + Reset method: power off, hold down the Reset button, then turn on the power (this process still needs to hold down the Reset key), release the button in about 5 seconds, the router will restore to the factory default value. Default management address: 192.168.1.1 default username and password: admin/admin TL-R420 Reset method: press the Reset key about 2 seconds after the release, the router will restore to the factory default value. SOHO routers using this reset method are: TP-R410 +, TP-R460 +, TP-R860 +, TP-R1660M.
PORT SERIAL TPLINK 941N PASSWORD
The default logon IP address is 192.168.1.1, and the default username and password are admin/admin. After resetting, the router will be restored to the factory settings. Otherwise, the configuration may not be restored to the default value. The power cannot be switched off before the router is fully started. Then, the router will return to the factory status. When the SYS indicator is blinking, release the Reset button. The default logon IP address is 192.168.1.1, and the default username and password are admin/admin, when logging in, please note that your computer's IP address is in the 192.168.1.X (X is 2-254) network segment!Ģ), with PWR, SYS light router and TL-FWR1100, TL-FR1000 two firewall router reset method:ĭisconnect the vro power, hold down the Reset button with a tip object (such as a pen tip), and re-plug in the power (this process still needs to hold down the Reset key). After the M1 and M2 lights flash three times at the same time, the vro can be relaxed and Reset successfully Īfter resetting, the router will be restored to the factory settings. Turn off the power of the vro and hold down the Reset key to find a tip like a pen tip, power up the vro (you still need to press and hold the Reset key). There is a small hole in the front/back panel of the vro with the word "Reset" next to it. Broadband router 2, wireless 3, switch 4, ADSL 5, Print Serverġ), with M1, M2 lamp TL-R4XX, TL-R4XXX next-generation network Bar and TL-FR5300 firewall router reset method: TP-LINK network and communication products:ġ.
0 kommentar(er)
